973913041214005 Genuine Configured Main PCB EWX14 Top Load, No Heater Version, for Electrolux Group Washing Machines

This genuine Electrolux configured main board, part 973913041214005, runs the EWX14 control platform in top load washing machines that don't have a water heater. Configured means it comes programmed for a particular group of machines, so it isn't interchangeable with every EWX14 board. Check the number on the label of your old board, or the parts list for your machine, before ordering.

Symptoms of a failed top load washer control board

The main board is the brain of the washer. It reads the water level, lid lock and user controls, then switches the inlet valves, motor and drain pump through each part of the cycle. When it fails you might see a dead display, buttons that don't respond, error codes that keep returning after other parts have been checked, a machine that fills but won't agitate or spin, or one that stops mid cycle. Water damage, burnt tracks and power surges are common causes. Rule out simpler faults such as a lid switch, pressure sensor or wiring before replacing the board.

Part details

• Genuine Electrolux part 973913041214005
• Configured main PCB for the EWX14 platform
• For top load washing machines
• Version without heater

Fitting a new main board

Unplug the washer and turn off the taps. Photograph every connector on the old board before unplugging anything, and handle the new board by its edges to avoid static damage. Plug each connector back into the same socket, secure the board and any cover, then run a rinse and spin to confirm everything works. If water got into the old board, fix that leak first or the new one may fail too.

Questions about this part

Can I use a different EWX14 board?

Not safely. Configured boards are set up for particular machines, and the with-heater and without-heater versions are different parts. Match 973913041214005 to the label on your old board or your parts list, or send us your model and product numbers through the parts enquiry form.