900403955 Genuine 200mm Flexible Rangehood Duct AR200FD for Electrolux Group Ducted Rangehoods

Flexible duct is the usual way to connect a ducted rangehood to a roof cowl or wall vent, as it bends around joists and framing. 900403955 is a genuine Electrolux 200mm flexible duct, sold under accessory code AR200FD. The 200mm size suits rangehoods with a 200mm outlet. The length supplied isn't stated in our product information, so measure your run and ask us through the parts enquiry form if you need more than one.

Choosing and running a 200mm rangehood duct

Ducting carries steam, smoke and grease-laden air from the rangehood to outside. The wider the duct and the smoother the path, the better a rangehood can do its job, so stick with the full 200mm size from the rangehood to the roof or wall. Flexible duct works best pulled out to its full length, without sags or tight kinks, as the ribbed inside and any crush points slow the air. A long, saggy or squashed duct is a common reason a capable rangehood sounds loud yet leaves cooking smells behind.

Part details

• Genuine Electrolux part 900403955
• Electrolux accessory code AR200FD
• 200mm diameter
• Flexible duct for bending around framing

Installing flexible duct

Switch the rangehood off at the wall before you connect anything to it. Stretch the duct out fully and cut it to length with sharp snips, keeping the run as short and straight as you can. Slide each end over its spigot, seal with foil tape and secure it with a duct clamp. Support the duct along its length so it doesn't sag. Roof and ceiling work comes with fall risks, so use proper access gear.

Questions about this part

Will 200mm duct fit my rangehood?

Only if your rangehood outlet is 200mm. Many rangehoods use 150mm or 125mm outlets, and changing size needs a proper adaptor. Measure the outlet spigot across its outside diameter before ordering 900403955.