900402650 Genuine Rangehood Filter C600001 for Westinghouse Rangehoods WRG950CGS

Part 900402650 is a genuine Westinghouse rangehood filter, also labelled with the number C600001. It is listed for the Westinghouse WRG950CGS. Filters clog and wear out over the years, and a fresh one gets the hood drawing properly again. Rangehoods use a wide variety of filter shapes and sizes, so the easiest way to confirm fit is to find 900402650 or C600001 on the old filter, or check the model number on the label inside the hood.

When to replace a Westinghouse rangehood filter

The filter sits in the underside of the hood and catches grease and cooking residue before the air reaches the fan. As it loads up, airflow drops, so steam and smoke hang around the cooktop, the motor sounds strained and cooking smells linger in the kitchen. A blocked filter can also drip grease back down onto the cooktop and adds to the fire risk around the fan housing. Filters that are bent, torn or no longer clip in firmly are best replaced rather than cleaned, as they let grease slip past and coat the motor.

Part details

• Genuine Westinghouse part 900402650
• Also identified by the number C600001
• Listed for the Westinghouse WRG950CGS rangehood

Changing the filter

Switch the rangehood off at the wall and let any lights cool down. Most filters release with a spring catch or tab on the front edge, so support the filter as you unclip it, because it can drop once free. Compare the old and new filters side by side for size and clip position, then push the new one in until the catch locks. Run the fan to check it sits firm without rattling.

Questions about this part

How do I find my rangehood model number?

Take the filter out and look for a sticker or plate inside the hood canopy. It shows the model number, such as WRG950CGS, and often a product number. Send these through our parts enquiry form if you would like the filter confirmed.