88310000299 Genuine Heating Element Assembly 1400W 240V for Blanco Appliances, Blanco Replacement Heater Element Assy

88310000299 is a genuine Blanco heating element assembly rated at 1400W on 240V. It is listed as an element assembly rather than a bare element. The appliance and models it suits aren't on file, so please check that the number matches the label on your old element, and compare its shape, rating and terminals. If you're not sure, send your Blanco model number through the parts enquiry form.

When a Blanco heating element needs replacing

A heating element turns electricity into heat by passing current through a resistance wire inside a sealed sheath. When the wire breaks, the element goes open circuit and produces no heat at all. A short to the sheath usually trips the safety switch as soon as the element switches on. Other clues are blistering, a split in the sheath or burnt terminals. An electrician or technician can confirm a failed element with a resistance test before you order. At 1400W and 240V, a healthy element should read roughly 41 ohms.

Part details

• Genuine Blanco part 88310000299
• Rated 1400W
• 240V supply
• Listed as an element assembly

Fitting a heating element safely

Turn the appliance off and isolate the power before you touch any wiring. Hard-wired appliances need a licensed electrician. Photograph the terminal connections, then remove the old assembly along with any seals or brackets. Fit the new one so it sits clear of nearby parts, reconnect each wire to its original terminal and test it under power.

Questions about this part

How can I check my old element has failed?

With the power isolated and the wires removed, measure across the element terminals with a multimeter. An open circuit means a broken element. A 1400W element at 240V should read around 41 ohms, and any reading to the outer sheath points to a short.