8588082764024 Genuine Washing Machine Drain Hose 2.6m for Electrolux, Simpson, Westinghouse Front Loaders EWF14012 EWF12832 SWF14843 WWF1284

Need a new outlet hose for an Electrolux, Simpson or Westinghouse front loader? 8588082764024 is the genuine 2.6 metre drain hose assembly, also listed as 4055690566 and 8082764021. It's on file for Electrolux EWF and EWW models such as the EWF14012 and EWF12832, the Simpson SWF12743 and SWF14843, and Westinghouse machines including the WWF1274 and WWF1044M7WA. Check your model before ordering.

Leaking or blocked washing machine drain hose

The drain hose carries waste water from the drain pump out to the standpipe or laundry trough. Because it sits behind the machine, damage often goes unnoticed until there's water on the floor. Hoses split where they bend over the trough edge, get crushed or kinked when the washer is pushed back against the wall, or perish with age. A kinked or partly blocked hose slows draining, which can leave water in the drum, stop the spin or bring up a drain error. A split or loose hose leaks during the pump-out.

Part details

• Genuine Electrolux group part 8588082764024
• Drain hose assembly, 2.6 metre length
• Also listed as 4055690566, 8082764021 and 808276401
• Suits Electrolux, Simpson and Westinghouse front loaders

Replacing the drain hose

Switch off at the wall and turn off the taps. Lower the hose end into a bucket to let any water out, then remove the back cover or access panel to reach the pump connection. Note how the hose is routed and clipped, fit the new one the same way, and avoid sharp bends when you push the machine back. Run a drain and spin to check the joints stay dry.

Questions about this part

Is 2.6 metres long enough for my laundry?

It's the length supplied for the models listed. If the trough or standpipe is further away, an extension hose and joiner can be added, but keep the outlet within the height range given in your washer's installation instructions.