8588071287029 Genuine Tub to Pump Hose for Simpson, Westinghouse Washing Machines, Electrolux Part 807128701

This genuine hose, part 8588071287029, carries water from the bottom of the washing machine tub to the drain pump. Its Electrolux description is bowl to pump hose, bowl being another word for the tub, and it's also numbered 807128701. The hose is listed for Simpson and Westinghouse washing machines. We don't have a model list on file, so check that 8588071287029 or 807128701 matches the number on your old hose, or compare its length, bends and end sizes before ordering.

Washing machine leaking underneath or not draining?

Every time the machine drains, water leaves the tub through this hose and passes to the pump, which pushes it out the drain hose. The hose flexes slightly as the tub moves during the spin, so over time the rubber can perish, crack at the bends or split near the clamps. A damaged hose leaves water pooling under the washer, often only while it drains. Socks, coins and lint can also lodge in the hose and block it, causing slow draining, water left in the tub or a drain error.

Part details

• Genuine Electrolux group part 8588071287029
• Electrolux number 807128701
• Tub to drain pump hose
• Suits Simpson and Westinghouse washing machines

Replacing the tub to pump hose

Turn the washer off at the wall, unplug it and turn off both taps. Bail or drain out any water left in the tub, keeping towels handy for spills. Photograph the hose position and clamp angles, release the clamps and ease the old hose off. Push the new hose fully onto each spigot, refit the clamps in the same spots, then run a rinse and spin and check for drips.

Questions about this part

Will this hose fit my Simpson washer?

It's listed for Simpson and Westinghouse washers, but we don't have a confirmed model list for 8588071287029. Read the model and serial number from the rating label and send them through our parts enquiry form, or match the number on your old hose.