8583792418029 Genuine Drain Pump with Thermal Cut-Out for Electrolux Group Washing Machines, Washer Drain Pump

Genuine Electrolux drain pump 8583792418029 has a built-in thermal cut-out and suits Electrolux group washing machines. The thermal cut-out switches the pump off if it overheats, for example when it's jammed, which protects the motor. No model list is on file for this number, so match it to the code on your old pump, or your washer's parts list, before ordering.

Why your washing machine won't drain

At the end of each wash and rinse, the drain pump pushes water out through the drain hose so the machine can spin. If the pump fails or its thermal cut-out keeps tripping, water stays in the drum, the cycle pauses or stops, clothes come out dripping and a drain error may show. The cut-out often trips when something is jammed in the impeller, so the pump runs briefly, stops, then tries again. Check the pump filter and drain hose for socks, coins and lint first. A pump that stays silent or is seized needs replacing.

Part details

• Genuine Electrolux part 8583792418029
• Drain pump with built-in thermal cut-out
• Protects the motor if the pump jams
• For Electrolux group washing machines

Swapping the drain pump

Switch off at the wall, close the taps and drain the machine through the filter or drain hose into a shallow tray, as there's often water left inside. Photograph the hose and wiring connections, then remove the old pump. Fit the new one, tighten the clamps and run a rinse and spin while watching for leaks.

Questions about this part

The pump hums but water won't drain. Is it faulty?

Not always. A blocked filter or something caught in the impeller can stop the pump moving water and trip its thermal cut-out. Clear the filter first. If it still won't pump, the pump has likely failed.