8581327442100 Genuine Shock Absorber Assembly for Electrolux Group Washing Machines, Also Listed as 1327442107, Tub Damper

8581327442100 is a genuine Electrolux shock absorber assembly for Electrolux group washing machines, also known by the number 1327442107. Shock absorbers sit under the tub and soak up movement as the drum spins. Most machines use two or more, and they wear at a similar rate. Check either number on your parts list or the printed label on your old absorber, and count how many your machine has before ordering.

Washing machine banging on spin? Worn shock absorbers

During a spin, the tub moves around on its springs, and the shock absorbers damp that movement so it doesn't hit the cabinet. When they wear, they no longer resist, and the tub swings much further than it should. You'll hear thumping or banging at the start of the spin, notice the machine walking across the floor, or see it stop spinning because the control senses an unbalanced load. Left too long, the loose tub can damage the door seal, the cabinet and the bearings. With the machine unplugged and the top off, push down on the tub. If it bounces freely, the absorbers are tired.

Part details

• Genuine Electrolux part 8581327442100
• Also listed as 1327442107
• Shock absorber assembly for the tub suspension
• For Electrolux group washing machines

Replacing washer shock absorbers

Pull the plug out and close both water taps. Access is usually through the base or by removing the front or back panel, depending on the model. The absorbers are held by pins or bolts at the tub and base. Change them as a set so the tub moves evenly, and check the pins and mounting holes for wear. Run an empty spin cycle to finish.

Questions about this part

Should I replace both shock absorbers?

Yes, it's good practice. They age together, so if one has failed the other is usually worn too. Replacing just one can leave the tub unevenly supported and the banging may come back. Check how many your machine uses and order to suit.