8581322553513 Genuine Shock Absorber Assembly for Electrolux Group Washing Machines, Tub Suspension Damper Replacement

This genuine Electrolux shock absorber assembly, part 8581322553513, damps the movement of the washing machine tub. Shock absorbers sit under the tub and soak up the bounce and sway as the drum speeds up and slows down. Worn dampers are a common cause of loud banging during spin, so if your machine has started walking across the floor, they're worth checking first.

Washing machine banging or shaking on spin

Dampers work like small friction shocks. Each time the tub moves, they resist it and stop it hitting the cabinet. When the friction pads wear or the damper loses its resistance, the tub swings too far, especially as a spin starts, and you hear it thumping against the sides. The machine may also vibrate across the floor or stop with an unbalance error. With the damper removed, push it in and out by hand. It should resist firmly through the whole stroke, and if it slides freely it's worn out.

Part details

• Genuine Electrolux part 8581322553513
• Shock absorber assembly for washing machines
• Damps tub movement during spin
• Replace as a set for even damping

Replacing washing machine shock absorbers

Unplug the machine and turn off the taps before tipping or opening it. Dampers are usually held with plastic pins or bolts at the tub and the base. Fit the new damper the same way round as the old one, and replace all the dampers at the same time where possible so the tub is supported evenly. Run a spin with a mixed load to check the banging has gone.

Questions about this part

How many shock absorbers does my washer need?

Most front loaders use two, and some use more. Check how many are fitted to your machine and replace them together so they wear evenly and the tub stays balanced.