8581192673029 Genuine Bowl Plate Support Gasket (PP) for Electrolux Group Top Load Washing Machines, Washer Tub Seal

8581192673029 is a genuine Electrolux gasket for the bowl plate support of a top load washing machine. In these machines the bowl is the tub that holds the wash water, and this gasket seals the joint where the plate support meets it. It's described as the PP version, the usual shorthand for polypropylene, so check that it matches your machine's parts list before ordering.

Tracing a leak under a top loader

Water under a top loader after a wash can come from several places, including hoses, the pump and seals around the bowl. A gasket at the bowl plate support sits low on the tub, so when it hardens, splits or gets disturbed during a bearing or seal job, water seeps out during the wash and drips onto the floor or the base. Rust or white mineral tracks under the bowl are a common clue. Before buying, look for wet trails leading from the bowl base after a wash, rather than assuming the pump or a hose is to blame.

Part details

• Genuine Electrolux part 8581192673029
• Gasket for the bowl plate support
• Marked PP in the Electrolux description
• Suits Electrolux group top load washers

Before you fit the gasket

Unplug the washer and turn off both taps first. Getting to this gasket usually means a fair bit of dismantling under the bowl, so it's a job for a confident DIYer or a repairer. Clean the sealing faces thoroughly and fit a new gasket rather than reusing the old one. Tighten fixings evenly, then run a short fill and check underneath for leaks.

Questions about this part

Which washing machines use 8581192673029?

It's an Electrolux group top load washer part, but our records don't list specific models. Look for the number on the parts list for your machine, using the model and product numbers on its rating label, or send them through our parts enquiry form and we'll confirm.