8581191252015 Genuine Hexagon Head Screw M5 x 16.5 for Electrolux Group Washing Machines, M5 Hex Head Washer Fastener

Hexagon head screw 8581191252015 is a genuine Electrolux fastener with an M5 thread and a 16.5mm length, and we list it with Electrolux group washing machine parts. A hex head lets you apply more torque with a socket or spanner than a slotted or Phillips head would allow. As our records don't say exactly where it's used, match the size and part number against your parts list or the screw you're replacing.

Where a hex head screw matters in a washing machine

Washing machines shake hard during spin, so their fasteners carry more load than most appliance screws. Hex head screws are typically chosen where parts need clamping tightly, such as brackets and mounts. A loose or missing screw lets parts shift, which can lead to knocking, rattling, alignment problems and wear on the parts it was holding. Stripped or corroded heads are another reason to replace a screw, since they can no longer be tightened properly. Always replace like with like, as a longer screw can foul internal parts and a shorter one may not hold.

Part details

• Genuine Electrolux part 8581191252015
• Hexagon head
• M5 thread, 16.5mm length
• Listed with Electrolux group washing machine parts, models not on file

Fitting tips

Unplug the machine and close the taps before removing any panels. Use a correctly sized socket or spanner rather than pliers so the head isn't rounded off. Start the screw by hand to avoid cross threading, then tighten it firmly. If the original screw had a washer or thread locker, do the same with the new one.

Questions about this part

How do I check the size of my old screw?

Measure the thread diameter, which is 5mm for an M5 screw, and the length from under the head to the tip, which is 16.5mm for this part. A known M5 nut is a quick way to confirm the thread.