8581190957317 Genuine Drain Pump Assembly 50Hz for Electrolux Group Washing Machines

Genuine Electrolux drain pump assembly 8581190957317 is built for 50Hz power, the mains frequency used in Australia. It's an Electrolux group washing machine part, and there's no model list on file for this number. To confirm fit, look for 8581190957317 in the parts list for your machine, or compare the old pump's label, outlet and mounting points with the photo before ordering.

Washing machine not draining? Check the drain pump

The drain pump empties the tub at the end of each wash and rinse, pushing water out through the drain hose. If it fails, the machine may stop with water still sitting in the drum, show a drain error, take far longer than normal to empty, or make a loud humming or grinding noise without moving any water. Before blaming the pump, check the drain hose for kinks and clear lint, coins or hair from the pump inlet, or the filter if your machine has one, as a blockage gives the same symptoms.

Part details

• Genuine Electrolux part 8581190957317
• Drain pump assembly
• Rated for a 50Hz supply
• Electrolux group washing machine part, no model list on file

Fitting the drain pump

Unplug the washer and turn off both taps. Drain as much water as you can and keep towels handy, because some will be trapped in the hoses and pump. Take a photo of the wiring and hose layout, then move the clamps and connectors across to the new pump. Run a short rinse and spin and check underneath for leaks before pushing the machine back into place.

Questions about this part

How can I tell if it's the pump or a blockage?

If you hear the pump humming but no water moves, clear the drain hose and pump inlet first. If they're clear and the pump still only hums or won't run, the pump is the likely fault. A completely silent pump can also point to a wiring or control problem.