85801500052716 Genuine M4 x 5mm Screw, 1/4 Inch Hex Head with PH2 Phillips Drive, Black, for Electrolux Group Appliances

Lost a screw during a repair? 85801500052716 is a genuine Electrolux M4 x 5mm screw with a 1/4 inch hex head, a PH2 Phillips recess and a black finish. A short screw like this is typically used to hold thin panels, trims or brackets, where a longer one could foul something behind. Our records don't name the appliance, so compare the thread, length and head with your original before ordering.

Choosing the right replacement screw

Screws are easy to lose when a panel comes off, and it's tempting to grab whatever fits from the shed. In an appliance that can cause trouble. A screw that's too long can puncture a hose, pinch a wire or crack a plastic part, and the wrong thread can strip the hole so the panel never sits tight again. A loose or missing screw also leads to rattles and vibration, and on some appliances an earth connection relies on a panel being fixed down properly. Matching the original M4 thread, 5mm length and head style avoids all of that.

Part details

• Genuine Electrolux part 85801500052716
• M4 metric thread, 5mm long
• 1/4 inch hex head with PH2 Phillips recess
• Black finish

Fitting tips

Isolate power to the appliance before removing any panel. Start the screw by hand so it doesn't cross-thread, then drive it with a PH2 screwdriver or a 1/4 inch nut driver. Snug it down without over-tightening, as small M4 threads strip easily in thin sheet metal or plastic.

Questions about this part

Which appliance is 85801500052716 used in?

The stock record doesn't name the appliance, only the screw itself. Compare the M4 thread, 5mm length, hex head and black finish with the screw you're replacing, or check your model's parts list for 85801500052716 before ordering.