85801310020622 Genuine 0.62 Gas Injector for Electrolux Group Gas Cooktop Hotplate Burners, Electrolux Jet 0131002062

Gas injector 85801310020622 is a genuine Electrolux part sized at 0.62 and also listed as 0131002062. Its description carries the note H/P, which we read as a hotplate burner injector for Electrolux group gas cooktops and cookers. The injector is the tiny jet that measures out gas to a burner. No gas type is recorded against it, so confirm the size your burner needs before ordering.

How a gas injector affects burner flame

Every gas burner is fed through an injector with a precisely drilled hole. The hole size is matched to the burner's heat rating and to the gas, natural gas or LPG, so the right amount of fuel mixes with air. A blocked or damaged injector gives a small, weak or uneven flame, while the wrong size can cause yellow, sooty flames or a burner that roars and lifts off its ports. Injectors are also changed when an appliance is converted from one gas to another.

Part details

• Genuine Electrolux part 85801310020622
• Also listed as 0131002062
• Injector size 0.62
• Marked H/P (hotplate) in its description
• Gas type and models not on file

Who should fit a gas injector

Only a licensed gas fitter should change a gas injector. They'll isolate the gas supply, match the injector size to the burner and gas type from the appliance data plate, fit it with the correct seal or thread, then leak test and check the flame. Never drill out or swap injectors by guesswork, as the wrong size is a safety risk.

Questions about this part

Is 0.62 for natural gas or LPG?

Our records don't state the gas type for this injector. LPG burners usually use smaller injectors than natural gas, but the right size depends on the burner. Check the gas data label on the appliance, or ask your gas fitter to confirm 0.62 is correct.