793665 Genuine Touch Control Display for Fisher & Paykel Ovens, F&P Oven Touch Display Control Module Replacement

Part 793665 is the genuine Fisher & Paykel touch control display, the panel you tap to operate the appliance and read its settings. We've listed it as an oven part because it sits in F&P's cooking parts number range, though no model list is on file. Before ordering, look for 793665 on the back of the existing display or on your appliance's parts list.

Touch controls not responding? Common display faults

The touch display takes your input and shows what the appliance is doing, passing instructions to the main control electronics. Faults usually show as a blank or flickering screen, missing segments, pads that won't respond or respond on their own, or constant beeping. Moisture, steam, heat and power surges are frequent causes. Before replacing the display, check the appliance has power, try a reset by switching off at the isolator for a minute, and make sure the wiring plug behind the panel is seated properly.

Part details

• Genuine Fisher & Paykel part 793665
• Touch control display module
• Replaces a display that is blank, faulty or unresponsive
• Match the number on the old display before ordering

Changing the display

Isolate power at the switchboard first, as ovens are usually hard-wired and this work suits a licensed electrician. Take photos of every plug before unclipping the old display, and handle the new one by its edges to avoid static damage. Refit any gaskets or tape that keep moisture out, then restore power and test each touch pad.

Questions about this part

My display is blank. Is it definitely this part?

Not always. A blank display can also come from a power supply fault, a loose plug or a failed main board. Check power and the connections first. If those are fine, the display is a likely cause, and a technician can confirm it.