793319 Genuine Hinge Bracket Right or Left Hand for Fisher & Paykel Appliances, F&P Door Hinge Mounting Bracket

A genuine Fisher & Paykel hinge bracket, part 793319, which F&P lists for use on either the right or left side. That's handy if you're reversing a door or replacing a bracket on just one side. The description doesn't name the appliance and we hold no compatible models for it, so check for 793319 on the old bracket or your model's parts list. Our parts enquiry form is there if you need a hand confirming it.

What a hinge bracket does

The hinge bracket is the mounting point that ties the door hinge to the appliance body. It carries the load of the door, keeps the hinge in line and sets how the door sits against the cabinet or seal. If a bracket bends from a knock or from the door being pushed too far, or its screw holes strip out, the door can sag, rub, fail to close or leave a gap along one edge. Fixing the bracket is often the cure when a new hinge alone hasn't helped.

Part details

• Genuine Fisher & Paykel part 793319
• Hinge bracket
• Listed for right or left hand use
• Appliance type not stated, confirm the part number on your old bracket

Fitting the hinge bracket

Turn off the appliance at the wall before starting. Take a photo of the hinge and bracket so you can see how they line up. Support the door so it can't fall when the bracket is undone. Fit the new bracket, refit the hinge, then adjust and check the door closes evenly with no rubbing before tightening everything fully.

Questions about this part

Do I need a separate left and right bracket?

Fisher & Paykel lists 793319 as right or left, so the same bracket is meant for either side. If you're replacing both sides, order two. Check the shape against your old bracket first to be sure it's the same part.