793296 Genuine Inner Door Glass for Fisher & Paykel Ovens, Inside Oven Door Glass Pane

Part 793296 is the genuine inner glass panel for a Fisher & Paykel oven door, the pane closest to the oven cavity. It's made to handle the heat inside the oven and works with the outer layers of glass to keep the door front cooler. Door glass differs in size, thickness and coating from model to model, so confirm the number or measure the old pane before you order.

Cracked inside oven door glass

Most oven doors are built from two or more panes with air gaps between them, and the inner pane takes the most heat. It can crack from a knock with a baking dish, from cold water or a damp cloth hitting it while hot, or from stress at the clips and retainers that hold it. Signs include a visible crack or chip, the outer door getting much hotter than usual, and steam or heat escaping around the door. A broken inner pane should be replaced before the oven is used again.

Part details

• Genuine Fisher & Paykel part 793296
• Inner door glass panel
• For Fisher & Paykel ovens
• Inner glass retainers are separate parts in the same range

Handling and fitting oven door glass

Let the oven cool fully and switch it off at the circuit breaker. Wear gloves and eye protection, especially if the old glass is broken. Many doors come off the hinges for this job, so check your manual. Note which way round the old pane sits, as coated glass must face the right way. Fit the retainers firmly but don't overtighten any screws on the glass.

Questions about this part

Which way round does the inner glass go?

Some oven glass has a heat reflective coating on one side, and fitting it the wrong way can affect the door's performance. Take a photo or mark the old pane before removing it, and follow any markings printed on the new glass.