758974507 Generic Dishwasher Aquastop Inlet Hose suits Smeg Dishwashers, Safety Shut Off Water Inlet Hose

Part 758974507 is a generic aquastop inlet hose made to suit Smeg dishwashers that use hose number 758974507. An aquastop hose feeds water from your tap to the dishwasher and has a built-in safety valve that shuts off the supply if a leak is detected. It's a compatible aftermarket hose, so check the number on your old hose and compare the connections at both ends before ordering.

Dishwasher not filling or leaking at the inlet hose?

The inlet hose is under mains pressure whenever the tap is on, so wear here can cause real water damage. An aquastop hose adds protection with a valve at the tap end that closes if the inner hose bursts or water collects in the outer sleeve. Once it has tripped, many aquastop valves stay shut, so the dishwasher won't fill and may show a fill error. Other signs are a wet patch at the tap or under the dishwasher, a changed colour in the indicator window on valves that have one, or a hose that is kinked, cracked or swollen.

Part details

• Generic part number 758974507
• Aquastop safety inlet hose
• Made to suit Smeg dishwashers using hose 758974507
• Compatible aftermarket part, not supplied by Smeg

Fitting the aquastop hose

Turn off the water at the tap and switch off the dishwasher at the wall. Ease the dishwasher out to reach the inlet connection, noting how the hose and any electrical lead for the valve are routed. Fit the new hose by hand, tightening the tap fitting snugly with its washer in place. Turn the tap on slowly and check both ends for drips before sliding the dishwasher back.

Questions about this part

Is this hose made by Smeg?

No. It's a generic compatible hose made to suit Smeg number 758974507, not a part supplied by Smeg. Compare the end fittings and, if your old hose has an electrical lead for the valve, check the new one matches before fitting.