758974075 Genuine Aquastop Inlet Hose for Smeg, Ariston Dishwashers DWA6214S DWA314W DWAU6315X DWAFI6315T DWAI6315XT LFF8M122AUS LFC2C19

Part 758974075 is a genuine Aquastop inlet hose for Smeg and Ariston dishwashers. It is also known as C00372679 and 482000023524, with the numbers 758976196 and C00256554 linked to it as well. Smeg models on file include the DWA314W and DWA6214S, the DWAFI6315T, the DWAI6315XT and the DWAU6315X, and it is also listed for the LFF8M122AUS, LFC2C19 and LFB5M019.

Dishwasher not filling or Aquastop triggered?

An Aquastop hose replaces a plain inlet hose with one that has a built-in safety valve at the tap end and an outer sleeve around the water line. If the inner hose splits or leaks, the safety system shuts off the supply before water reaches the floor. Once triggered, it often can't be reset, so the dishwasher stops filling, shows a water inlet fault or sits with the program stalled. A damaged or kinked hose, a cracked fitting or a leak at the tap connection are other reasons to replace it. Check the tap is fully open and the filter screen is clear first.

Part details

• Genuine part 758974075
• Cross references C00372679, 482000023524, 758976196 and C00256554
• Aquastop inlet hose with leak protection
• Listed for Smeg DWA series and Ariston dishwashers

Fitting the Aquastop hose

Turn off the water tap, switch off at the wall and unplug the dishwasher. Ease the machine out of its cavity, then follow the old hose back to see where it connects at the base, which may include an electrical plug as well as the water fitting. Photograph the connections, transfer them to the new hose and make sure it isn't kinked. Hand tighten the tap fitting, open the tap slowly and check for leaks.

Questions about this part

Is this the same as part C00372679?

Yes. C00372679 and 482000023524 are listed as cross references for this hose, along with 758976196 and C00256554. If your old hose or service paperwork shows any of these numbers, this is the matching genuine hose.