668114 Genuine Dishwasher Drain Hose for Gaggenau Dishwashers DF260161 DF261161 DF240161 DF241161 DF260141 DF260761 DF241761, BSH 00668114

Part 668114 is a genuine BSH dishwasher drain hose, sold under the Bosch parts banner and also listed as 00668114. It carries the waste water from the drain pump out to your sink trap or standpipe. Parts listings tie it to Gaggenau dishwashers in the DF240, DF241, DF260 and DF261 series, including the DF260161 and DF261161. Check your model plate against the list before ordering.

Dishwasher not draining or leaking under the sink

Every pump out sends the dirty water through this hose. When it's kinked, split or partly blocked, you'll notice water left sitting in the bottom of the tub after a cycle, a slow or laboured pump out, or a puddle on the floor near the sink. Food scraps and grease build up inside the hose over the years, and a hose that has been squashed behind the cabinet can crack along a fold. If you can hear the pump running but the water isn't leaving, the drain hose is one of the first things to inspect.

Part details

• Genuine BSH part number 668114
• Also listed as 00668114
• Drain hose from the dishwasher pump to the household drain
• Listed for Gaggenau DF240, DF241, DF260 and DF261 series dishwashers

Replacing the drain hose

Turn the dishwasher off at the wall and shut off the water tap. Keep a towel and a shallow tray handy, because the old hose will still hold some water. You'll usually need to slide the machine out of its cavity to reach the pump connection. Route the new hose without kinks, secure it to the sink trap or standpipe with a suitable clamp, then run a rinse cycle and check both ends for drips.

Questions about this part

Is 668114 the same part as 00668114?

Yes. BSH part numbers are often written with two leading zeros, so 668114 and 00668114 are the same drain hose. Whichever version appears on your old hose or in your manual points to this part.