611332 Generic Dishwasher Drain Pump suits Bosch Dishwashers 00611332 00423048 SMS50E12AU SMS68M02AU SMU50E35AU SGS46M72AU SGU53E75AU

If your Bosch dishwasher finishes with water still sitting in the base, the drain pump is high on the suspect list. Part 611332 is a generic replacement pump made to suit Bosch dishwashers that use 00611332, 00423048, 00187970 or 00165261. It's listed for more than 100 models, including the SMS50E12AU and SMS68M02AU, the SMU50E35AU, and the SGS46M72AU and SGU53E75AU, plus many SHE and SHX models.

Bosch dishwasher not draining

At the end of each wash and rinse, the drain pump pushes dirty water out of the sump and through the drain hose. When it fails, water is left in the bottom of the tub, the cycle may stop partway, or you'll hear humming or buzzing but little water moving. A grinding or rattling noise often means glass or a seed is caught in the impeller. Before replacing the pump, clean the filter, check the drain hose isn't kinked or blocked, and make sure the sink spigot is clear.

Part details

• Generic replacement, part 611332
• Replaces Bosch 00611332, 00423048, 00187970 and 00165261
• Dishwasher drain pump
• Listed for 102 Bosch dishwasher models

Changing a Bosch drain pump

Unplug the dishwasher and turn off the water. Bail out any standing water and remove the filters. On many Bosch models the pump is reached from underneath, after removing the base cover. Note the wiring plug and hose clamps, twist or unclip the old pump out, then fit the new one and check its seal is seated. Run a rinse and check for leaks.

Questions about this part

Is this a Bosch-made pump?

No, 611332 is a generic replacement made to suit Bosch dishwashers that use 00611332, 00423048, 00187970 or 00165261. Check the number on your old pump, or match your model to the list, before ordering.