574832 Genuine Oven Door Glass Retainer for Fisher & Paykel Built-In Ovens OB90S4LEX1, OB90 Door Glass Clip

Inside the door of the OB90S4LEX1 built-in oven, retainer 574832 holds the glass in place, and this is the genuine Fisher & Paykel part. Once a retainer cracks or a clip breaks, the glass can shift, rattle or refuse to sit square when the door goes back together. This factory piece is the direct replacement.

Loose or rattling glass in your OB90 oven door

The door on an OB90 is made up of several panes of glass with air gaps between them, which keeps the outer face cooler while the oven runs. Retainers grip the edges of the glass and hold each pane at the right spacing. Over years of heat they can go brittle, and they often snap when the door is dismantled for cleaning. Watch for glass that moves when you tap it, a pane that has dropped at one corner, grease or condensation creeping between the layers, or a door that won't reassemble because the glass has nothing to locate on.

Part details

• Genuine Fisher & Paykel part 574832
• Door glass retainer
• Listed for the OB90S4LEX1 built-in oven
• Holds the door glass at the correct spacing

Fitting the retainer

With the oven off and cold, remove the door and lay it on a padded surface. Take photos at each stage as you dismantle it and note the order of every pane. Fit the new 574832 retainer where the old one sat, refit the glass, and wipe each pane clean before closing it up. Rehang the door and check it shuts evenly.

Questions about this part

Does this retainer fit other OB90 ovens?

It's listed for the OB90S4LEX1. Other OB90 versions may use a different retainer, so compare the full model number on your oven's rating label with this one, and send it through the enquiry form if yours is different.