574289 Genuine Thermal Limiter 130°C Campini for Fisher & Paykel, De'Longhi Ovens, Replaces De'Longhi 066068

Fisher & Paykel now supplies this genuine 130°C Campini thermal limiter as 574289. It took over from De'Longhi part number 066068, so if your oven's parts list or old limiter shows that number, this is the current replacement. It's a safety cut-out that opens when its mounting point overheats. We don't have the oven models on record, so match the old number or send us your model and serial number.

Oven limiter failure, what to look for

Unlike the thermostat, which regulates cooking temperature, the limiter is a backstop that only acts when something has gone wrong. At 130°C its contacts open and cut power to the circuit it protects. If it fails or keeps tripping, the oven may go cold mid cook, stop heating while the light stays on, or refuse to start. Overheating behind the panels from a dead cooling fan, a poor door seal or blocked ventilation is the usual trigger, so check those before fitting a new limiter.

Part details

• Genuine Fisher & Paykel part 574289
• Campini thermal limiter
• Rated 130°C
• Replaces former De'Longhi number 066068
• Oven models not on record

How to replace the limiter

Isolate power at the circuit breaker and let the oven cool. A licensed electrician should do the work on a hard wired oven. Locate the limiter on its bracket, photograph the wiring, and swap the wires across one by one. Make sure the new limiter sits flat against its mount for good heat contact, then test the oven and its cooling fan.

Questions about this part

My parts list shows 066068. Is this the right part?

Yes. Our records show 574289 replaced the De'Longhi number 066068 for this 130°C Campini limiter. If you'd like us to double check against your oven, send the model and serial number through the parts enquiry form.