574199 Genuine 6 Button Electronic Clock for Fisher & Paykel Ovens, Replacement Oven Clock Display Module

Part 574199 is a genuine Fisher & Paykel electronic oven clock with six buttons. It shows the time and is used to set the oven's timing functions on models with this six button layout. Fisher & Paykel ovens have used several clocks over the years, with different button counts and displays, so count the buttons on yours and check the number on the old clock, or the oven's model number and product code, before ordering.

Oven clock blank or buttons not working?

On many electronic ovens the clock is more than a clock. It often controls timed cooking, and on some ovens the elements won't come on until the time has been set or the clock is in manual mode. A failing clock can show a blank or flickering display, flash constantly after every power cut, ignore button presses, beep at random, or leave the oven refusing to heat. Moisture and heat around the control panel are common causes. Check the clock is set to manual before deciding it's faulty.

Part details

• Genuine Fisher & Paykel part 574199
• Electronic oven clock
• Six button layout
• For Fisher & Paykel ovens

Replacing the clock

Isolate the oven at the circuit breaker, as ovens are normally hard-wired, and use a licensed electrician or appliance technician if you're unsure. Take off the knobs and fascia, label or photograph every wire on the old clock, then move them across one by one to the new module. Restore power, set the time and run the oven to confirm it heats.

Questions about this part

Why does my oven only work after I set the clock?

Many electronic ovens with a programmable clock won't heat until the time is set, especially after a power cut. Set the time and select manual cooking. If the display stays blank or won't respond, the clock may need replacing.