573647 Genuine Oven Bake Element for Fisher & Paykel Ovens, Conventional Bake Heating Element, Fisher and Paykel Oven Spare Part

Part 573647 is the genuine Fisher & Paykel bake element, the heater an F&P oven leans on for conventional baking. As a factory part rather than a universal element, it should match the fit and fixings of the one you're taking out. We don't have a model list on file for 573647, so check the number stamped on your old element, or your oven's parts list, before you order.

Fisher & Paykel oven not heating properly? Check the bake element

In bake mode most of the heat comes from this element, with the thermostat switching it on and off to hold the temperature you set. When it fails, the oven usually takes far longer to warm up or never reaches temperature, and cakes or roasts come out pale and undercooked on the bottom. Look for a break, blister or bulge in the sheath, a burnt patch near the terminals, or a safety switch that trips the moment bake is selected. A multimeter across the terminals will confirm an open circuit.

Part details

• Genuine Fisher & Paykel part number 573647
• Bake element for Fisher & Paykel ovens
• Factory replacement, not a universal element

Changing the bake element

Switch the oven off at the isolating switch or circuit breaker and let it cool completely. Built-in ovens are normally hard-wired, so in Australia this job belongs with a licensed electrician. Photograph the terminal connections before anything is unplugged, move each lead to the matching terminal on the new element, then run the oven on bake to confirm it heats evenly.

Questions about this part

Where do I find my Fisher & Paykel oven model number?

Open the oven door and look around the front edge of the cavity or the door frame for the rating label. It lists the model and serial number. Send both through our parts enquiry form if you'd like us to check that 573647 suits your oven.