565934 Genuine User Interface Wiring Harness Kit for Fisher & Paykel OB90 90cm Built-In Ovens, UI Electrical Kit

Part 565934 is a genuine Fisher & Paykel electrical kit for the user interface on OB90 ovens, the 90cm built-in range. It links the display and controls to the rest of the oven's electronics. A similar kit with a different number is used on the 60cm range, so check that your model number starts with OB90 and confirm the product code on the rating label before ordering.

When the OB90 oven controls play up

The user interface on an electronic oven is the panel and display you use to pick a function and set the temperature. Its wiring carries signals and power between that panel and the power module that switches the elements and fan. Damaged, heat-affected or loose wiring can leave the display dead or flickering, make the controls ignore inputs, or trigger communication error codes. Faults like these can also come from the display board or power module, so a technician should test the circuit before parts are ordered.

Part details

• Genuine Fisher & Paykel part 565934
• Electrical kit for the oven user interface
• For OB90 90cm built-in ovens
• Supplied as a service spare

Fitting advice

This is a wiring job on a hard-wired appliance, so it should be done by a licensed electrician or qualified appliance technician. Isolate the oven at the circuit breaker first. Photograph every connector before removal and route the new harness along the original path, away from hot surfaces and sharp edges. Refit all clips and covers, then test each control and function before putting the oven back in service.

Questions about this part

Will this fit my OB60 oven?

It's listed for the OB90 range. The 60cm OB60 ovens use a different user interface kit. Send your model number and product code through the parts enquiry form if you'd like help finding the right one for your oven.