563144 Genuine Mechanical Clock Module 230V for Fisher & Paykel Built-In Ovens, Replacement Analogue Oven Clock

This genuine Fisher & Paykel module, 563144, is a 230V mechanical clock for built-in ovens. It replaces a clock that has stopped, gained or lost time, or no longer sets properly. Fisher & Paykel ovens have used both mechanical and electronic clocks, so make sure yours is the mechanical type, then confirm with the number on the old clock or the oven's model number and product code.

Oven clock stopped? What the clock module does

A mechanical clock module runs from mains power, with a small motor and gear train driving the hands. On some ovens the clock is also tied into an automatic cooking function, so a jammed or faulty clock can stop the oven from heating or leave it stuck in auto mode. Typical faults include a clock that has stopped completely, hands that run slow, a setting knob that turns without moving the hands, or a buzzing noise from the module. If the oven won't heat at all, check the clock settings before suspecting the elements.

Part details

• Genuine Fisher & Paykel part 563144
• Mechanical clock module
• 230V
• For Fisher & Paykel built-in ovens

Fitting the clock module

Ovens are usually hard-wired, so isolate the power at the circuit breaker and have a licensed electrician or appliance technician fit the module if you're not confident. Remove the control knobs and fascia, photograph every wire on the old clock before disconnecting it, and transfer them one at a time. Once refitted, restore power, set the time and check the oven heats in manual mode.

Questions about this part

My oven won't heat since the power went out. Could it be the clock?

Possibly. On ovens where the clock controls automatic cooking, a power cut can leave it in auto mode. Reset the clock to manual as described in your user manual first. If the clock itself has stopped or won't reset, the module may need replacing.