550713 Genuine Fan Forced Oven Element for Fisher & Paykel Ovens, Rear Fan Element, Cross Reference FE-07

This genuine Fisher & Paykel fan element, part 550713, is the ring shaped heating element that sits around the fan at the back of a fan forced oven. It heats the air that the fan then moves through the cavity. It cross references to element type FE-07. With no models on file, check your oven's model number, or compare the shape, terminals and mounting of your old element, before ordering.

Fan forced oven not heating

If the fan runs but the oven stays cold or heats slowly on fan forced settings, while bake or grill functions still work, the fan element is the usual culprit. Elements fail open circuit, often with a visible break, blister or burnt spot on the sheath, and some trip the safety switch when they short to earth. Uneven cooking and a long preheat can be early signs. A technician can confirm the fault by checking the element's resistance and insulation.

Part details

• Genuine Fisher & Paykel part 550713
• Fan forced (convection) oven element
• Cross reference FE-07
• For Fisher & Paykel ovens

Replacing a fan element

Built-in ovens are usually hard-wired, so this is a job for a licensed electrician, with the circuit isolated at the switchboard first. Remove the fan cover inside the oven, then the screws holding the element. Photograph the terminals at the back before disconnecting them. Fit the new element, reconnect the wiring exactly as before and run the oven on a fan forced setting to test.

Questions about this part

What does the FE-07 cross reference mean?

FE-07 is a reference number used for replacement fan elements of this type, and Fisher & Paykel element 550713 matches it. If your old element or parts list shows FE-07, this genuine part is a suitable choice, but confirm your oven model if in doubt.