539448P Genuine Dual Wok Burner Igniter 700mm for Fisher & Paykel Gas Cooktops, F&P Wok Burner Spark Electrode

For Fisher & Paykel gas cooktops with a dual wok burner, 539448P is the genuine igniter, listed at 700mm. It's the spark electrode that sits beside the wok burner and lights it when the ignition fires. The 700mm on record is its length, so measure your old one including its lead. Compatible cooktop models aren't on our records, so compare the length and fitting or check your parts diagram for 539448P.

Wok burner not lighting on an F&P cooktop

A dual wok burner has inner and outer flame rings, and the igniter's electrode tip sparks across to the burner to light the gas. Ceramic insulators around the electrode can crack, the tip can corrode or get coated in burnt food, and the lead can be damaged by heat. Typical symptoms are a weak or missing spark at the wok burner only, sparking to the wrong place, or the burner lighting slowly with a puff. Clean the electrode and burner first, as grease often causes the same issue.

Part details

• Genuine Fisher & Paykel part 539448P
• Igniter for a dual wok burner
• Length 700mm
• For Fisher & Paykel gas cooktops
• Models not on record, compare with your old igniter

Changing the wok burner igniter

A licensed gas fitter should carry out this repair. Turn off the gas and isolate power to the ignition system first. Route the new lead along the same path as the old one, away from hot burner parts and sharp edges, and connect it to the same outlet on the ignition box. Check the spark gap and confirm the wok burner lights reliably on low and high.

Questions about this part

How do I measure my old igniter?

Measure the full length, following the lead from the electrode to the connector. Fisher & Paykel lists 539448P at 700mm, and other F&P igniters come in different lengths, so measuring is a good cross check alongside your model's parts diagram.