536968P Genuine Glass Bracket Assembly for Fisher & Paykel Induction Cooktops CI604 Series, Glass Top Mounting Bracket

This genuine Fisher & Paykel glass bracket assembly, 536968P, is listed for the CI604 induction cooktop range. It is the bracketry that goes with the glass top, needed when the original has bent, cracked or come loose. No full model list is on file, so look for CI604 at the start of the model number on your cooktop's data label, or send the full number through the parts enquiry form.

Induction glass loose or not sitting flat?

An induction cooktop's glass has to sit level and firm over the coils, with even support all round. Brackets attached to the glass or frame hold it in position. If a bracket breaks or its fixings let go, the glass can rock, lift at one edge, sit unevenly in the bench or let spills creep underneath onto the electronics. Glass brackets are also needed when a top is being replaced and the old bracketry is damaged in the process.

Part details

• Genuine Fisher & Paykel part 536968P
• Glass bracket assembly for the CI604 induction range
• For a loose, rocking or lifting glass top
• Service part for glass top repairs

Fitting the glass bracket

Switch the cooktop off at the switchboard first, as induction cooktops are hard-wired and a licensed electrician should handle removal. With the unit out of the bench and resting on a soft, flat surface, note how the existing brackets locate before taking them off. Fit the new assembly in the same position, check the glass sits level, then refit and test every zone.

Questions about this part

Will this suit a CI905 induction cooktop?

No, this assembly is listed for the CI604 range. Wider induction cooktops use a different glass bracket, so send us your full model number through the parts enquiry form and we will find the matching part.