536348P Genuine Induction Cooktop Glass Assembly for Fisher & Paykel Cooktops CI604CTB1, Replacement Glass Top Panel

A cracked top on a CI604CTB1 induction cooktop is replaced with this genuine Fisher & Paykel glass assembly, part 536348P. It is the service glass for this model, so confirm the data label under your cooktop reads CI604CTB1 before ordering. Other Fisher & Paykel induction models use their own glass, and we can check yours if you send the full model number through the parts enquiry form.

Replacing broken induction cooktop glass

On an induction cooktop the glass does more than look smart. The induction coils sit just below it and heat the pan directly, so the glass needs to be whole, flat and properly supported. A heavy drop, thermal shock or a pan dragged over a chip can crack it. Once there is a crack, moisture and food can get to the coils and electronics, so stop using the cooktop and switch it off at the switchboard. Owners usually spot a fine crack spreading from a zone, chipped edges or a top that has lifted from its frame.

Part details

• Genuine Fisher & Paykel part 536348P
• Glass assembly for the CI604CTB1 induction cooktop
• Replaces a cracked, chipped or broken glass top
• Licensed electrician required, the cooktop is hard-wired

Changing induction cooktop glass

Turn the cooktop's circuit off at the switchboard before anything else, and have a licensed electrician remove and refit the unit. Lift the cooktop from the bench onto a soft, flat surface. Note the position of every coil, lead and plug before you move them across to the new glass. Test each zone with an induction pan once it is back in place.

Questions about this part

Can I keep using my induction cooktop with cracked glass?

No. A crack lets spills and moisture reach the coils and electronics underneath, which is a shock and fire risk. Switch it off at the switchboard and leave it off until the glass assembly has been replaced.