529964P Genuine DishDrawer Lid Assembly for Fisher & Paykel Double and Single DishDrawer Dishwashers DD60DAX9 DD60DCX9 DD60SCX9 DD60DCX7

This genuine Fisher & Paykel lid assembly, part 529964P, is the lid that closes down over the wash tub inside a DishDrawer. Models on file are the double drawer DD60DAX9 and DD60DCX9, the single DD60SCX9, and the earlier DD60DCW7 and DD60DCX7. The lid is what seals the drawer while it washes, so check the model number on your rating label against this list before ordering.

Leaking DishDrawer or lid not closing properly?

A DishDrawer has no front door to seal. Instead, once the drawer is shut and a program starts, a lid inside the cabinet lowers onto the tub and seals it so the water stays in during the wash. When the lid is cracked or warped, or the seal around it is damaged, water can escape around the top of the tub. You may find water on the floor, a damp cabinet or leak related fault codes. Problems with the lid moving down and back up can also stop a cycle from starting or finishing. Replacing the full lid assembly is the usual repair when the lid itself is damaged.

Part details

• Genuine Fisher & Paykel part 529964P
• Complete lid assembly for DishDrawer dishwashers
• Listed for DD60DAX9, DD60DCX9 and DD60SCX9
• Also listed for the DD60DCW7 and DD60DCX7

Fitting a DishDrawer lid

Switch off at the wall and isolate the power before working on the drawer. The lid sits in the cabinet above the tub, so the drawer usually has to come out to reach it. Take photos of how the old lid mounts and of any connections before removal. After fitting, run a rinse program and check the lid lowers fully with no leaks. A technician can help if the lid mechanism itself is at fault.

Questions about this part

Is this the genuine Fisher & Paykel lid?

Yes. 529964P is a genuine Fisher & Paykel lid assembly. Compare the number with any label on your old lid, or match your DishDrawer model number to those listed here, and send us the model if it is not on the list.