523250P Genuine Chassis Control Module PH5.1 Single 230V for Fisher & Paykel Single DishDrawer Dishwashers, F&P DishDrawer PCB

GenuineGenuine part supplied by the appliance manufacturer. SKU 523250P
Original part no.
523250P
Part grade
Genuine
Appliance
Dishwasher Parts
$158.44 inc GST$144.04 ex GST
Order inApprox. 5 to 15 days to arrive in store

This part is an order in item. We order it from our supplier once you place your order. It usually takes approximately 5 to 15 days to arrive in store, then we ship it to you or hold it for collection.

Tracked delivery Australia-wide Dispatched as soon as it reaches us. Approx. 5 to 15 days to arrive in store.
Delivery times by state
WA metro1 to 2 business days
WA regional2 to 5 business days
SA and NT3 to 6 business days
VIC, NSW and ACT3 to 6 business days
QLD4 to 7 business days
TAS4 to 7 business days
Remote areas5 to 10 business days

Estimated times after dispatch. Tracking details are emailed when your order ships.

Local pickup in WAMorley, Myaree or Joondalup
  • 3/135 Russell StreetIn stock at this store

Choose Pickup at checkout to collect from our Morley, Myaree or Joondalup store in Western Australia. Please wait for your ready for collection notification before coming in.

Check your model number before ordering. Not sure this part suits your appliance? Send us your model number and we will confirm it for you.

  • Genuine manufacturer part
  • Tracked delivery Australia-wide
  • Parts experts on call
  • Secure checkout

Product details

Part 523250P is a genuine Fisher & Paykel chassis module for single DishDrawer dishwashers, listed as PH5.1, 230V and supplied as a service part. As the name suggests, it's the control board mounted on the DishDrawer's chassis. A double DishDrawer version exists under 523254P, so make sure you order the single version for a one drawer unit. Models aren't recorded against 523250P, so check your parts diagram first.

DishDrawer control board faults

As the main control board, this module typically switches the wash motor, drain pump, water inlet and heater as the cycle runs. When it fails, the DishDrawer might show no power, stop mid-cycle, trip the safety switch, refuse to fill or drain, or display fault codes that persist after a reset. Water leaking onto the board and power surges are common causes. Because wiring faults and failed components elsewhere can mimic a dead board, test the motor, heater and harness before replacing the module.

Part details

  • Genuine Fisher & Paykel part 523250P
  • Chassis control module, PH5.1
  • Single DishDrawer version
  • 230V service module
  • Double DishDrawer version is 523254P
Voltage 230V
Version PH5.1
Configuration Single DishDrawer

Fitting the chassis module

Unplug the DishDrawer or switch it off at the wall and close the water tap. The unit normally has to come out of its cavity to reach the module. Photograph every connector before disconnecting, handle the new board by its edges, and route the harness exactly as before. After fitting, run a full cycle and check for fault codes.

Questions about this part

Can I fit this to a double DishDrawer?

No. 523250P is listed as the single version. Fisher & Paykel lists the double DishDrawer chassis module separately as 523254P. Check your model number, or send it to us with the serial number, to be sure you get the right board.

Specifications

Original part number523250P
Part gradeGenuine : Genuine part supplied by the appliance manufacturer.
SKU523250P
ApplianceDishwasher Parts
Shipping weight1.5 kg

Shipping and returns

Shipping

In-stock parts ordered before 2pm AWST on business days are dispatched the same day. We deliver Australia-wide with Australia Post and couriers, with tracking on every order.

Order in parts usually reach us within 5 to 15 days and are then dispatched to you straight away.

Local pickup is also available from our stores in Morley, Myaree and Joondalup, Western Australia. Choose Pickup at checkout and wait for your ready for collection notification before coming in.

Returns

Unused parts in original packaging can be returned within 30 days. Electrical parts that have been fitted cannot be returned unless faulty. Please check your model number before ordering.

You may also need

Can't find the part you need?

Our parts team can source from over 2.4 million parts. Send us your model number and we will come back to you, usually the same day.