522967P Genuine Filter Plate Assembly 901 902 for Fisher & Paykel DishDrawer Dishwashers, DishDrawer Filter Plate Replacement

Covering both the 901 and 902 versions, 522967P is the genuine Fisher & Paykel filter plate assembly for those DishDrawer dishwashers. The filter plate sits in the floor of the tub and traps food scraps before water is recirculated. Other DishDrawer generations use different filter plates, so check your drawer's version. Model numbers aren't on file for this part, so send us your model and product code if you'd like the match confirmed.

Gritty dishes or a DishDrawer that drains poorly

Every drop of wash water passes through the filter plate on its way back to the pump. A plate that is cracked, warped or no longer sealing lets food particles and grit through, which can end up back on the dishes, block the spray arm or wear the pump. A clogged plate can slow draining and leave dirty water in the bottom of the drawer. If cleaning doesn't fix it, or the plate is damaged, fitting a fresh assembly restores proper filtration.

Part details

• Genuine Fisher & Paykel part 522967P
• Filter plate assembly
• Listed for 901 and 902 DishDrawers
• Models not on file, check your drawer version

Fitting the filter plate

Turn the DishDrawer off at the wall and remove the rack. Lift out the spray arm and any filter parts above the plate, following your model's layout, and clean the sump area. Seat the new filter plate assembly so it lies flat and locks in where it should. Refit the spray arm, check it spins freely, then run a rinse program and watch the water drain.

Questions about this part

How often should the filter plate be cleaned?

Check and rinse it regularly, especially if dishes go in without much scraping. A plate that is cracked or warped should be replaced rather than cleaned, because gaps let debris reach the spray arm and pump.