522090 Genuine DishDrawer Heater Plate Kit 230V for Fisher & Paykel Dishwashers DD60DCX7 DD60SCX7 DD605 DS605 DD60DI7 DD60DCW7 DD60SCTX7 DD60DCX6

For Fisher & Paykel DishDrawer dishwashers in the 605 family, part 522090 is the genuine 230V heater plate kit. It is listed for 47 models, from the DD605 and DS605 to the DD60DC, DD60SC, DD60SCT and DD60DDF series, including the DD60DCX7, DD60SCX7 and DD60DI7. Fit it when the drawer no longer heats the water or keeps tripping the power.

DishDrawer not heating water or tripping power

The heater plate warms the water in the drawer during the wash so detergent can break down grease and food. When it fails, cycles may run cold, take much longer than usual, or stop with an error, and dishes come out greasy, cloudy or wet. A heater that has broken down internally can also leak current to earth and trip the safety switch as soon as heating starts. Hard water scale and food residue around the plate shorten its life, so keep the filter clean and use rinse aid.

Part details

• Genuine Fisher & Paykel part 522090
• Heater plate kit, 230V
• Suits DD605, DS605, DD60DCX7, DD60SCX7 and DD60DI7
• Listed for 47 DishDrawer models across the DD60DC, DD60SC, DD60SCT and DD60DDF ranges

Replacing the DishDrawer heater plate

Switch the dishwasher off at the wall and turn off the water before you begin. Expect to remove and partly strip down the drawer to reach the heater plate, so allow time and take photos as you go. Clean away scale and residue from the area around the plate, then reassemble and run a hot program to check it heats and doesn't leak. If you are unsure, have a qualified technician fit it.

Questions about this part

Will this suit my DD60 DishDrawer?

It is listed for 47 DishDrawer models in the 605 family, including the DD605, DS605, DD60DCX7, DD60SCX7 and DD60DI7. Find your model number on the drawer's serial label and match it to the list before ordering.