5214FR3188G Genuine Drain Hose 2.7m for LG Front Load Washing Machines WD14030D6 WD14060D6 WD1475NCW WD12021D6 F1495BD F14A8FD

5214FR3188G is LG's genuine external drain hose assembly for front load washers, 2.7m long. It's listed for more than 80 LG models, from the WD10020D and WD12021D6 through the WD14030D6, WD14060D6 and WD1475NCW to the WV5-1408W, F1495BD and F14A8FD. Use it to replace a hose that has split, kinked or gone brittle with age.

LG washer leaking water at the back

The drain hose carries waste water from the pump to the laundry tub or standpipe. Because it sits behind the machine, damage often goes unnoticed until water appears on the floor. Look for splits near the ends, cracks where the hose bends over the tub edge, or a perished section where it rubs against the wall. A hose that was crushed or kinked when the machine was pushed back can also slow draining and bring up a drain error.

Part details

• Genuine LG part 5214FR3188G
• External drain hose assembly
• 2.7m long
• Suits a wide range of LG front load washing machines

Changing the drain hose

Pull the plug out and shut off both water taps. Drain the remaining water through the pump filter at the front before disconnecting anything, with a tray and towels ready. Remove the back or lower cover as needed, release the clamp at the pump end and fit the new hose. Secure the outlet end so it can't slip out of the tub, then run a rinse to test.

Questions about this part

Can I extend the drain hose instead?

Joining extra hose adds another possible leak point and can make the pump work harder, so replacing the whole hose is the tidier fix. At 2.7m, check the length suits your laundry layout before you order.