518489P Genuine Wash Control Kit P9 W AA SG for Fisher & Paykel Washing Machines, F&P Electronic Washer Control

518489P is a genuine Fisher & Paykel wash control kit for Fisher & Paykel washing machines, listed as P9 W AA SG. The wash control is the electronics that run the machine's programs, reading its inputs and switching the parts that fill, wash, drain and spin. Controllers look alike across F&P models, so match 518489P against your washer's model and serial number in the parts list before ordering.

Signs of a failed control on a Fisher & Paykel washer

When a washing machine controller fails, the faults can be confusing because they look like other parts failing. Common signs are a dead display or no response to buttons, a machine that stops mid-cycle with an error code, a motor that won't spin or agitate even though it tests fine, valves that don't open, or random beeping and resetting. Before replacing the control, rule out simpler causes such as a tripped safety switch, a faulty power point, damaged wiring or a failed sensor, and look up the fault code in your manual or service guide.

Part details

• Genuine Fisher & Paykel part 518489P
• Wash control kit
• Description code P9 W AA SG
• For Fisher & Paykel washing machines

Fitting the control kit

Unplug the washer and wait a few minutes before opening it, as control boards can hold a charge. Photograph every connector and its position, and release the latches rather than pulling on wires. Handle the new board by its edges to avoid static damage. Once fitted, run a test program and check every function. A board swap is best done by a qualified appliance technician.

Questions about this part

Where are the model and serial numbers on my F&P washer?

Look for a label inside the lid, around the door opening, or on the back of the cabinet. It lists the model, product code and serial number. Quote those when checking the parts list for 518489P, or pop them into our parts enquiry form.