512817 Genuine Crockery Insert with Clips for Fisher & Paykel DishDrawer Dishwashers DD60DCX9 DD60SCX9 DD60SCW9 DD24DCTW9 DD24SCTX9 DD60DI9

Part 512817 is the genuine crockery insert for Fisher & Paykel DishDrawer dishwashers, supplied with its front and back clips. It is listed for nearly fifty DD60 and DD24 models, among them the DD60DCX9, DD60SCX9 and DD60SCW9, the DD24DCTW9 and DD24SCTX9, and models such as the DD60DI9 and DD24DI9. Replacing a broken insert keeps plates standing upright through every wash.

Plates falling over in your DishDrawer?

The crockery insert sits in the drawer's rack and holds plates and bowls upright in rows, spaced so water can reach every surface. Its clips lock it to the rack so it stays put when the drawer slides in and out. When tines break off or a clip snaps, dishes lean into each other, fall over during the wash and come out with food still on them, and loose plates can chip. A broken insert can also shift and stop the spray arm from turning, which spoils the clean for the whole drawer.

Part details

• Genuine Fisher & Paykel part 512817
• Crockery insert for DishDrawer racks
• Supplied with front and back clips
• Listed for 49 DD60 and DD24 DishDrawer models

Fitting the crockery insert

With the dishwasher off and the drawer empty, pull the drawer out and note how the old insert clips onto the rack. Unclip it and check the rack wires for damage. Position the new insert the same way, then press the front and back clips on until they lock. Slide the drawer in and out a few times and turn the spray arm by hand to make sure nothing catches.

Questions about this part

Do the clips come with it?

Yes, this insert is supplied with its front and back clips, so you don't need to reuse the old ones. Check your DishDrawer model number, usually on a label on the side or front edge of the drawer, before ordering.