510855 Genuine Upper Fill Hose Kit for Fisher & Paykel DishDrawer Dishwashers, Top Drawer Water Fill Hose Spare

This genuine Fisher & Paykel kit, 510855, supplies the fill hose for the upper drawer of a DishDrawer dishwasher. In double DishDrawer models each drawer has its own water feed, so the top and bottom drawers use different fill hoses. Make sure it's the upper one you need, and check your model number and product code before ordering, as DishDrawer parts changed across the different generations.

DishDrawer top drawer not filling or leaking? Check the fill hose

Because a DishDrawer's tub slides out with the drawer, water reaches it through a hose that flexes every time the drawer opens and closes. Over years of use that hose can crack, chafe or kink, or its connections can start to seep. Typical signs are a top drawer that stops filling or fills slowly, an error or beeping at the start of a wash, poor cleaning from too little water, or water on the floor or in the cabinet underneath. Check the inlet valve and water supply too, as they can cause similar faults.

Part details

• Genuine Fisher & Paykel part 510855
• Fill hose kit for the upper drawer
• For Fisher & Paykel DishDrawer dishwashers
• Supplied as a spare parts kit

Before you replace the hose

Turn off the power at the wall and close the water tap supplying the dishwasher. DishDrawers usually need to come out of the cabinet to reach the hoses, so allow room and protect the floor. Note how the old hose is routed and clipped, as the new one must follow the same path to move freely with the drawer. Restore the water, check every joint for drips, then run a cycle.

Questions about this part

Do I need the upper or the lower fill hose?

This kit, 510855, is for the upper drawer. The lower drawer uses a different hose, and single DishDrawers may differ again. If you're not sure which you need, send your model number and product code through the parts enquiry form.