50297774-00/7 Genuine Complete Drain Filter for AEG, Electrolux, Westinghouse Dishwashers 50297774007 F65410IM ESF65060W WDF901SA ESL66010

50297774-00/7, also written 50297774007, is the genuine complete drain filter for a run of AEG, Electrolux and Westinghouse dishwashers. AEG models on file include the F65410IM and F65411VI, the F86070VI, and the F88015VI and F89020IM. For Electrolux it suits the ESF65060W and ESF65060X, the ESF66060X, the ESF68040X and the ESL66010. Westinghouse models include the WDF901SA, the WDF902SA and the WDU903SA.

Dishwasher leaving grit on dishes or not draining?

The drain filter sits in the sump at the bottom of the tub. Water passes through it on the way to the pumps, and food scraps are held back so they aren't sprayed onto clean dishes or jammed in the drain pump. A cracked, warped or missing filter lets debris through, leaving grit and food on dishes, blocking spray arm holes and wearing the pump. A filter that won't lock in place can also lift during the wash. If the dishwasher smells, drains slowly or leaves water in the base, clean the filter first and replace it if it's damaged.

Part details

• Genuine Electrolux group part 50297774-00/7
• Also numbered 50297774007
• Complete drain filter assembly
• Listed for AEG F series, Electrolux ESF and ESL, and Westinghouse WDF and WDU models

Fitting and cleaning the filter

Switch the dishwasher off and pull out the lower basket. The filter usually twists anticlockwise to release, then lifts out. Wipe out the sump, drop the new filter in and turn it until it locks, making sure it sits flat. Rinse it under the tap every week or two to keep the water flowing freely.

Questions about this part

Is 50297774-00/7 the same as 50297774007?

Yes. The number is written both ways, with and without the dash and slash. Either version on your parts list or on the old filter points to this complete drain filter.