463920003 Genuine Ignition Push Switch SPST Momentary for Euromaid Gas Cookers and Stoves GS60NG GCF60 GEGFS60 GTEOS60 GWH50NG GG90S

No click from the igniters when you press the button? Part 463920003 is the genuine Euromaid momentary ignition push switch, a single pole single throw (SPST) switch that closes only while it's held in. It's listed for 16 Euromaid cookers and stoves, including the GS60NG, GS50LP, GCF60, GEGFS60, GTEOS60, GWH50NG and GG90S, plus the SCNG7531 and SCLPG7531.

Euromaid igniter not sparking? Check the push switch

Pressing the ignition button closes this switch, which sends power to the spark generator and makes the electrodes click at each burner. When the switch fails, you'll get no spark at all, a spark only after pressing hard or several times, or clicking that won't stop because the contacts have stuck closed. Spills and moisture around the control panel speed up wear. If the spark generator and the ignition leads test fine, the switch is the usual suspect.

Part details

• Genuine Euromaid part 463920003
• Momentary push action, SPST contacts
• Ignition button switch for gas cookers and stoves
• Listed for 16 Euromaid models, in natural gas and LPG versions

Fitting the ignition switch

Turn the cooker off at the wall and shut off the gas supply before opening the control panel. Take a photo of the wires on the old switch, remove it from the fascia and fit the new one in the same position. Because this is a gas appliance, have a licensed gas fitter do the work if you're not qualified, and check every burner lights cleanly afterwards.

Questions about this part

Does this switch suit both natural gas and LPG models?

Yes, the models on file include both natural gas and LPG versions, such as the GS60NG and GS50LP. The switch sits on the electrical ignition side, so the gas type doesn't change which switch you need.