429736P Genuine Knobless Display Module 60 T2 for Fisher & Paykel Washing Machines, Washer User Interface Display Board

This display module, 429736P, is a genuine Fisher & Paykel part for knobless washing machines, meaning models controlled entirely by buttons with no program dial. The stock description marks it as the 60 size, T2 version, and other knobless modules are listed under separate numbers. Compatible models aren't on file. Match the number on your old module, or send your washer's model and serial number through the parts enquiry form.

Blank display or dead buttons on an F&P washer

Behind the console, the display module reads your button presses, lights the program and status indicators, and sends your choices to the motor controller. Faults appear as a display that's blank, dim or missing segments, buttons that do nothing, settings that change by themselves, or constant beeping. Moisture getting under the console and power spikes are frequent causes. Because a damaged harness or a failed motor controller can produce similar symptoms, check those before deciding the display module has failed.

Part details

• Genuine Fisher & Paykel part 429736P
• Knobless display module, 60 T2 version
• For button-controlled Fisher & Paykel washers
• Other knobless modules carry different numbers

Fitting the display module

Unplug the washer and turn off the taps, then open the console or lift the top deck to reach the module. Photograph the connectors, note any seals or covers protecting the board, and hold the new module only by its edges. Reconnect everything firmly and make sure water can't reach the board. Power up and work through the buttons and a short program.

Questions about this part

My washer has a dial. Will this module fit?

Unlikely. 429736P is a knobless module, made for machines without a program knob. Fisher & Paykel uses different modules for dial models, so send your model and serial number through the parts enquiry form and we'll find the right one.