420143P Genuine Nozzle Assembly for Fisher & Paykel Top Load Washing Machines GW612 GW712 IW712 IW812 MW512 WA55T56GW1 WA70T60GW1 WA80T65GW1

Fisher & Paykel top load washers in the GW, IW and MW ranges use this genuine nozzle assembly, part 420143P. It is listed for the GW612 and GW712, the IW712 and IW812, and the MW512, and it also suits a run of top loaders from the WA55T56GW1 up to the WA80T65GW1, such as the WA8056G1. The nozzle sits in the fill path and directs incoming water into the wash bowl.

F&P top loader leaking or spraying water while it fills?

When the washer fills, water from the inlet valve passes through the nozzle and is aimed down into the bowl. If the nozzle cracks, comes loose or gets blocked with scale or grit, the water can spray in the wrong direction. Signs include water running down the outside of the bowl or onto the floor during the fill, wet patches under the lid area, or a slow, uneven fill. Check for a cracked nozzle body or a hose that has slipped off it before looking at the valve.

Part details

• Genuine Fisher & Paykel nozzle assembly 420143P
• Part of the water fill path
• Listed for 18 top load models
• Includes GW612, IW812, MW512 and WA80T65GW1

Fitting the nozzle assembly

Unplug the machine and turn off both taps at the wall. Lift or tilt the top deck as your model requires, taking care not to strain any wiring. Note how the hoses attach to the old nozzle, then move them to the new one and make sure each clip is secure. Run a short fill and check for leaks around the nozzle and hoses.

Questions about this part

Which F&P top loaders take the 420143P nozzle?

On file it suits 18 models, including the GW512, GW612, GW712, IW712, IW812, MW512, MW513 and MW60, plus the WA55T56GW1 through to the WA80T65GW1. Check the model on the label at the back or under the lid.