410128 Genuine Dryer Door Catch for Fisher & Paykel, Haier Dryers AD39 AD55 ED56 ED57 DE50F56A1 DE40F56A1 DE45F56AW1 DE35F56AW1 HDY60M DE50F56E1

If your dryer door won't stay shut, this genuine catch is the part to look at. Fisher & Paykel part 410128 is also listed under the Haier number H0020202923, and it suits dryers such as the AD39, AD55, ED56 and ED57, the DE35F56AW1 through to DE50F56A2 models and the Haier HDY60M and HDY-M60.

Dryer door won't stay closed or dryer won't start

The catch holds the door shut against its seal while the drum turns. Dryers also have a door switch that must be pressed before the machine will run, and the door has to latch firmly for that switch to engage. When a catch wears, cracks or loses its grip, the door may pop open mid cycle, drift open when bumped or bounce back when closed, and the dryer can stop or refuse to start. Check the door hinges as well, since a sagging door can stop the catch lining up properly.

Part details

• Genuine Fisher & Paykel part 410128
• Haier cross reference H0020202923
• Door catch for Fisher & Paykel and Haier clothes dryers
• Listed for 15 dryer models including AD39, AD55, ED56 and HDY60M

Changing the door catch

Unplug the dryer before you start. Depending on the model, the catch is reached from the front panel or the door opening, and it is usually held by screws or clips. Take a photo of how the old catch sits before removing it. Fit the new catch in the same orientation, then close the door a few times to check it latches positively, the dryer starts with the door shut and it stops when the door is opened.

Questions about this part

Is H0020202923 the same part as 410128?

Yes. H0020202923 is the Haier number for this same door catch, and 410128 is the Fisher & Paykel number. Either number on your old part or paperwork points to this catch.