4055952925 Genuine Natural Gas Main Burner Injector for Electrolux Group Gas Cooking Appliances, NG Burner Jet Replacement

Genuine Electrolux injector 4055952925 is made for the main burner on natural gas. The injector is the small fitting with a precisely sized hole that sets how much gas reaches the burner. Its orifice size is not on file, so compare it with the size stamped on your old injector, or have your gas fitter check it against the appliance data plate. It is not suitable for LPG.

Main burner flame weak, yellow or uneven?

Because the injector controls gas flow, any blockage or damage changes the flame straight away. Spills that run down into the burner, spider webs and corrosion are common culprits. Symptoms include a small or yellow flame, soot on cookware or the burner, delayed lighting or popping noises. A burner left with the wrong injector after a conversion can also run too large or too small. Never enlarge or clean an injector hole with a drill or wire, since that changes the gas rate. If you smell gas, turn the appliance off and call a licensed gas fitter.

Part details

• Genuine Electrolux part 4055952925
• Natural gas (NG) injector
• For the main burner
• Not for LPG use

Have a licensed gas fitter install it

Gas injectors may only be changed by a licensed gas fitter in Australia. Shut the gas off at the appliance isolation valve or main supply and switch off power to any ignition first. Your fitter will confirm the injector matches the burner and gas type on the data plate, fit it with the right tools, leak test the joint and check the flame.

Questions about this part

How do I know if my appliance runs on natural gas?

The gas type is printed on the appliance data plate, often marked NG or Natural Gas. If it says LPG or ULPG, this injector is not suitable. Your gas fitter can confirm the type and the injector size required.