4055944393 Genuine Water Inlet Hose with Fittings for Electrolux Group Washing Machines and Dishwashers

Part 4055944393 is a genuine Electrolux group water inlet hose supplied with its fittings. Inlet hoses carry water from the tap to the appliance's inlet valve, and they're used on washing machines and dishwashers. Length and end fittings vary, and those details aren't on file for this one, so compare it with your old hose or send us your model number before ordering.

Signs your washer or dishwasher inlet hose needs replacing

An inlet hose sits under constant mains pressure whenever the tap is on, even when the appliance isn't running. Over time the rubber hardens, the outer layer cracks and the fittings corrode or lose their seal. Look for drips at the tap or the back of the appliance, a bulge or blister in the hose, rust or green build-up on the fittings, or a hose that's been kinked behind the machine. A burst inlet hose can flood a laundry or kitchen quickly, so replace one that shows any of these signs.

Part details

• Genuine Electrolux group part 4055944393
• Water inlet hose
• Supplied with fittings

Fitting a new inlet hose

Turn the tap off and unplug the appliance. Undo the old hose at both ends with a towel and bucket handy to catch trapped water. Check the new hose's washers are seated, then screw each end on by hand and finish with a gentle quarter turn. Avoid sharp bends behind the appliance, turn the tap on slowly and check both ends for drips.

Questions about this part

Will this hose fit my tap and appliance?

The fittings at the tap end and appliance end need to match what you have. Compare the ends on your old hose with the photo, and check the length reaches without stretching. Send us your model number if you'd like us to confirm.