4055926903 Genuine 5 Burner Gas Manifold for Electrolux Group Gas Cooktops, Gas Rail Assembly Replacement

On a five burner gas cooktop, the manifold is the main gas rail that feeds every tap, and 4055926903 is the genuine Electrolux version for a 5 burner layout. Gas enters the manifold from the supply connection and is shared out to each burner tap. It is usually only replaced when it has been damaged, corroded or has a leak that can't be fixed at a joint. With no model list on file, have your gas fitter check it against the original.

When a cooktop gas manifold needs replacing

Because the manifold carries gas to every burner, any fault here affects the whole cooktop. A leak from a cracked joint, damaged thread or corrosion is the most serious, and you may smell gas around the controls even with the knobs off. Manifolds can also be bent or damaged during installation or removal, which can stress the tap connections. If you smell gas, turn the supply off at the isolation valve or cylinder, ventilate the room and call a licensed gas fitter before using the cooktop again.

Part details

• Genuine Electrolux part 4055926903
• Gas manifold for 5 burner cooktops
• Feeds gas to each burner tap
• No model list on file, have your gas fitter confirm the match

Licensed gas fitter required

Replacing a gas manifold is gas work and must be done by a licensed gas fitter in Australia. They will isolate the gas and power, transfer the taps with new seals where needed, fit the manifold, then pressure and leak test the cooktop and check every burner before handing it back. Have your model and product number ready so they can confirm this manifold matches.

Questions about this part

Can I fit the manifold myself?

No. In Australia any work on gas fittings must be carried out by a licensed gas fitter. They can confirm this 5 burner manifold suits your cooktop and complete the leak testing required after the job.