4055922019 Genuine Pump and Brackets Assembly for Electrolux Group Appliances, Pump Supplied with Mounting Brackets

Part 4055922019 is a genuine Electrolux pump assembly supplied together with its mounting brackets. Because the brackets come with it, there is no need to transfer worn or corroded mounting hardware from the old pump. Electrolux uses many different pumps across its appliances, so confirm your model number against 4055922019 before ordering.

Signs of a failing appliance pump

A pump moves water through or out of the appliance at set points in the cycle. When it starts to fail you may hear a loud hum or grinding, notice water left sitting in the tub at the end of a cycle, see leaks underneath, or get a pump or drain fault code. Blockages from coins, hair pins, lint and food scraps can jam the impeller and mimic a failed pump, so it is worth checking the filter and hoses first. If the pump is clear but still hums without moving water, or has seized, it needs replacing.

Part details

• Genuine Electrolux part number 4055922019
• Pump assembly supplied with mounting brackets
• Suits Electrolux group appliances

Replacing the pump assembly

Switch off at the wall, turn off the water and drain as much water as you can before disconnecting anything. Photograph the hoses, clamps and wiring so they go back the same way. Remove the old pump with its brackets, fit the new assembly and secure every hose clamp firmly. Run a short program and check for leaks before pushing the appliance back into place.

Questions about this part

How do I check this pump suits my appliance?

Find the model and serial number on the appliance's rating label and match them to 4055922019. Compare the old pump's outlet positions, mounting points and electrical connector with the new assembly as well.