4055921409 Genuine Rangehood Mesh Filter 18 Layer 200 x 407.5mm for Westinghouse Rangehoods WRG905IS WRG907IS WRG910IS RRC935S RDHR9W

Grease filters wear out, dent and eventually clog beyond cleaning. Part 4055921409 is the genuine 18 layer mesh filter for a wide range of Westinghouse rangehoods, measuring 200 x 407.5mm. It is listed for WRG905, WRG907 and WRG910 models, the RRC900, RRC930 and RRC960 series, and the RDHR6 and RDHR9. The same filter also carries the number 0144002140.

Westinghouse rangehood grease filter replacement

The mesh filter sits under the canopy and catches grease from cooking vapour before it reaches the fan and ducting. Its stacked layers trap fat droplets as air is drawn through. A filter that is bent, torn or loaded with old grease cuts airflow, so the rangehood gets louder, clears steam and smells more slowly and can start dripping grease back onto the cooktop. Built-up grease in a filter is also a fire risk above a hot cooktop, which is why a damaged or worn-out filter is worth replacing rather than putting back.

Part details

• Genuine Westinghouse part 4055921409, also numbered 0144002140
• 18 layer mesh construction
• Measures 200 x 407.5mm
• Listed for WRG905, WRG907, WRG910, RRC and RDHR series rangehoods

Fitting and caring for the filter

Turn the rangehood off before removing the filter. Most mesh filters release with a spring catch or tab at the front edge. Check the old filter's size and shape against this one, then clip the new filter in so it sits flat with no gaps around the edge. Wash it regularly in warm soapy water or as the rangehood manual directs, and let it dry fully before refitting.

Questions about this part

How many filters does my rangehood need?

That depends on the width and model. Wider rangehoods such as 90cm units often use more than one filter. Count the filters in your canopy before ordering and buy one of these for each filter you are replacing.