4055912267 Genuine Switching PCB for Electrolux Group Rangehoods, Fan and Light Switch Control Board, Also Listed as 1330184467

This is a genuine Electrolux switching PCB, part number 4055912267, also catalogued as 1330184467. It's the circuit board behind the control buttons on Electrolux group rangehoods, switching the fan speeds and the lights. No model list is on file, so match either 4055912267 or 1330184467 to the label on your old board, or to your rangehood's parts list, before ordering.

Rangehood fan or lights not switching properly

Each press of a rangehood button is read by the switching board, which then powers the motor at the chosen speed or turns the lights on. When the board fails you might find buttons dead, the fan stuck on one speed, a hood that won't switch off, lights flickering, or a burning smell from the control area. Steam and grease getting into the board over the years is the usual cause, along with power spikes. Check the fuse, the motor and the keypad before replacing the board, as those can produce the same symptoms.

Part details

• Genuine Electrolux part 4055912267
• Also listed as 1330184467
• Switching PCB for the hood controls
• For Electrolux group rangehoods

Replacing the switching PCB

Isolate the rangehood at the wall or circuit breaker, then remove the filters and the cover over the controls. Photograph the board's wiring before disconnecting anything. Handle the new PCB by its edges, reconnect each lead to the same terminal, and test all speeds and lights. Hard-wired rangehoods should be fitted by a licensed electrician.

Questions about this part

Does this include the buttons or keypad?

No, it's the switching board only. The keypad that sits over it is a separate part. If your buttons are cracked or worn, check your parts list for the keypad number as well.